Remco's ES Water Pump

Click here to go back to Water Pumps

Operating Features

  • Motor speed adjusts to water needs
  • Positive shut-off at 75 to 85 PSI
  • Pressure relief safety valve
  • Capable of sustained low voltage operation

Specifications

  • Motor

    Type: 12 VDC, Permanent Magnet, Totally Enclosed, Non-Ventilated
    Leads: 14 AWG, 12” Long, Black Negative, Red Positive.
    TO AVOID PERMANENT ELECTRONIC DAMAGE, DO NOT REVERSE POLARITY.
    Temp. Limits: The ES Aquajet II is capable of sustaining continuous running, as shown in the above Heat Rise graph. Should ambient temperatures force the heat sink above 185°F, an auto reset thermal protector will shut down the system, allowing the components to cool. After approximately 10 minutes the pump will restart.

  • Speed Controller

    Factory Set to Approximately 10 Amps Max. Thermally Protected to Avoid Component Damage. Will Reset Automatically.
    CAUTION: Exterior Surfaces (heat sink), May Exceed 150°F After Only 15 Minutes of Operation.

  • Pump Design

    5 Chamber Diaphragm Pump, Self Priming, Capable of Being Run Dry

  • Typical Application

    Water Pressurization for RV and Marine

  • Materials

    Pump Housings: Polypropylene
    Controller Housings: Nylon
    Valves: EPDM
    Diaphragm: Santoprene
    Fasteners: Stainless Steel

  • Liquid Temperature

    140°F (60°C) Max.

  • Pump Certifications

    IAPMO, NSF

  • Priming Capabilities

    10 Feet

  • Available Quick-Connect Fittings

    TYPE SHAPE HOSE BARB SIZE
    1/2" 5/8" 3/4"
    HOSE BARB STRAIGHT QBS-554 QBS-555 QBS-556
    HOSE BARB ELBOW QBE-554 QBE-555 QBE-556
    THREADED 1/2" MALE QEST QTS-556

  • Performance Data

    Discharge Pressure Flow Current
    (PSI) (BAR) (GPM) (LPM) (AMPS)
    65 4.4 0.60 2.27 6.50
    60 4.0 0.70 2.65 6.50
    50 3.4 1.00 3.78 6.50
    40 2.7 1.60 6.05 6.50
    30 2.0 2.30 8.70 6.50
    20 1.4 2.70 10.22 5.80
    10 0.7 3.00 11.35 4.60
    OPEN OPEN 3.40 12.87 3.60